Table of Contents
Bin-BW ImageJ workshop: Bonn Apr, 2019
Date
April 10th (W) and 11th (T), 2019
Introduction
As part of the initiative Bin-BW (Bioimage-Net Baden-Württemberg), the Microscopy Core Facility of the University of Bonn (MCF, Institute of Innate Immunity) and the Bioimaging Center of the University of Konstanz offers workshops in image analysis based on the open-source software ImageJ.
The two-day introductory workshop teaches the basics of digital image processing and analysis for biological / biomedical studies. The goal of the workshop is that participants acquire basic knowledge and technique for measurements using image data.
Participation is most fruitful for learners who are conducting biological or medical research and are already using or are planning to use (light) microscopy for quantification purposes. If you already have generated data that poses a challenge of general interest, it is possible to integrate this data into the workshop agenda.
Participants should bring their own laptops. Please contact us in case this is not possible for you. Instructions on how to properly install and configure ImageJ will be provided before the workshop.
Location
The Bin-BW ImageJ workshop will take place at UKB, Sigmund-Freud-Str. 25, 53127 Bonn on 10th and 11th of April, 2019 at Lehrgebäude (10).
April 10th, 2019
we use three different rooms for three time slots below.
- 10:30 - 13:30: Seminarraum 9 (2G.001)
- 13:30 - 16:00: Seminarraum 10 (2G.002)
- 16:00 - 19:00: Seminarraum 12 (2G.004)
April 11th, 2019
- 09:00 - 17:00: Seminarraum 5 (1G.003)
A detailed agenda is listed in the table below.
Workshop trainer
Kota Miura (kotapub@gmail.com), Freelance Bioimage Analyst & Vice Chair, NEUBAIS (The Network of European Bioimage Analysts)
References
Preparation before coming
1. Please download Fiji from the following URL.
2. Start Fiji, then in the menu [Help > Update…]
- A window “ImageJ updater” opens. In that window, click the button “Manage update sites” at the bottom-left.
- Another window called “Manage Update Sites” opens. From the list of update sites, tick “CMCI-EMBL”.
- Close the “Manage update sites” window by clicking the button “close”.
- In the “ImageJ updater” window, click the button “apply changes” at the bottom. It takes a while to download additional files. When completed, you will be asked to restart Fiji - so quit Fiji, and relaunch Fiji. Check the menu and there should be a new menu item “EMBL”.
- More plugins to be installed will be announced later (using the update sites function, like explained above).
Schedule
The schedule below may change depending on the progress, but the order of topics will mostly be kept as it is listed.