Bioimage Analysis Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Bin-BW ImageJ workshop: Konstanz May, 2019 ======

{{:mainpages:courses:konstanz:bic.png?150 |}}{{:mainpages:courses:konstanz:bw.png?200 |}}{{:mainpages:courses:konstanz:unikonstanz.png?150 |}}
===== Date =====

January 15th and 16th, 2019

===== Introduction =====

As part of the initiative Bin-BW (Bioimage-Net Baden-Württemberg) the Bioimaging Center of the University of Konstanz offers workshops in image analysis based on the open-source software ImageJ.

The **two-day introductory workshop** teaches the basics of digital image processing and analysis for biological / biomedical studies. The goal of the workshop is that participants acquire basic knowledge and technique for measurements using image data. 

Participation is most fruitful for learners who are conducting biological or medical research and are already using or are planning to use (light) microscopy for quantification purposes. If you already have generated data that poses a challenge of general interest, it is possible to integrate this data into the workshop agenda.

Participants should bring their own laptops. Please contact us in case this is not possible for you. Instructions on how to properly install and configure ImageJ will be provided before the workshop.

===== Location =====

The Bin-BW ImageJ workshop will take place at the University of Konstanz on 15th and 16th of May, 2019 at room H308. A detailed agenda is listed in the table below.

===== Workshop trainer =====

Kota Miura (kotapub@gmail.com), Freelance Bioimage Analyst & Vice Chair, NEUBAIS (The Network of European Bioimage Analysts)

===== Preparation before coming =====

1. Please download Fiji from the following URL. 
  * https://imagej.net/Fiji/Downloads

2. Start Fiji, then in the menu [Help > Update...] 
  * A window "ImageJ updater" opens. In that window, click the button "Manage update sites" at the bottom-left. 
  * Another window called "Manage Update Sites" opens. From the list of update sites, tick "CMCI-EMBL". 
  * Close the "Manage update sites" window by clicking the button "close". 
  * In the "ImageJ updater" window, click the button "apply changes" at the bottom. It takes a while to download additional files. When completed, you will be asked to restart Fiji - so quit Fiji, and relaunch Fiji. Check the menu and there should be a new menu item "EMBL".  


===== Schedule =====

{{url>https://docs.google.com/spreadsheets/d/e/2PACX-1vQ1pMtCyhpuWfp9T7lzhTe-04Dy0gQJHun4JYPj6zl61Tnr5VebNkm4vcYf7IhdsAqY3r1okYujda3H/pubhtml?gid=0&amp;single=true&amp;widget=true&amp;headers=false 800,1000 noborder}}